J22 Spinnaker line catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable line catch for on the forestay attactment on the bow
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
WHY?
The J22 has either a piece of garden hose or a small sail batten to prevent the spinnaker line from falling in the water. Those are vulnerable to break or wear down after a while. This is a solution where you can simply print a new one if it breaks.
ATTACHMENT
The attachment process is very simple. With the forestay disconnected put the part in place, once the forestay is attached it is fully secured.
PRINTING
The hexagon version requires no special printing instructions. The first bridge line is a bit long for some printers, but supports are not necessary.
The no pattern version is intended to be printed without a top and bottom layer, program this in your slicer with gyroid infill 15%-25% depending on your preferences. With gyroid infill water will simply run through the print, the print is quicker and uses less material in total.
QUESTIONS
If you have any questions or your forestay attachment part is bent, feel free to contact me with a specified angle to better suit your J22. BETTER PICTURES COMING SOON
EDIT:
- Added better pictures
- Added model with more space for the baseplate