Creality CR-10S All-in-One Standalone Sideways Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variation of conversion kit where printer is oriented sideways from usual.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Great thanks to FourMix for the mod kit which I largely used, especially for the electronics. Some edits made to accommodate extra touch sensor wiring and different cable routing. I also did have to redesign the PSU bracket attachment holders to fit my slimmer/shorter PSU.
Two stock fans can be used with the modified cover for better thermal management.
Due to space limitations of my 3D printing work space, I had to layout the printer sideways and mounted the LCD as such with my own custom designed bracket attachment. I cut out the front part of the previous control box to use as a screen holder. I also created an updated more study LCD bracket attachment.
I liked the stylish feet by Cerebral_Balzy since it used the stock screws, I edited it to re-use rubber feet I already had.
When I first did the conversion it worked with an older 8-bit Creality board, since then I have upgraded to a slightly smaller, better, and quieter BigTreeTech SKR Mini E3 2.0 board; this board also fit nicely inside.