LoRa Text Terminal case with 16x2 LCD display and helix antenna slot.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a ESP32 based texting terminal using LoRa.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a case for LoRa based texting terminal that has a LCD display, ON/OFF toggle switch, battery holder mounting holes and BMS board mounting holes. Use 6x4 cm prototype boards - one for motherboard and the other for the radio module, by sliding them into the card slots on the back plate. The back plate has a U-shaped notch at the bottom so you can use a USB-C charging cable and use it off a 5V 1A adapter.
Here are the parts I used for reference.
1. ESP32-WROOM-32 Dev Board.
2. 16x2 LCD display with I2C board.
3. This BMS board.
4. SMTS-101-Sub Miniature Toggle Switch-2Pin (ON-OFF)
5. This LoRa module.
6. This 18650 cell.
Use M2x5 screws with this. The screw holes come un-tapped.