LoRa Text Terminal case with 16x2 LCD display and helix antenna slot.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for a ESP32 based texting terminal using LoRa.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a case for LoRa based texting terminal that has a LCD display, ON/OFF toggle switch, battery holder mounting holes and BMS board mounting holes. Use 6x4 cm prototype boards - one for motherboard and the other for the radio module, by sliding them into the card slots on the back plate. The back plate has a U-shaped notch at the bottom so you can use a USB-C charging cable and use it off a 5V 1A adapter.
Here are the parts I used for reference.
1. ESP32-WROOM-32 Dev Board.
2. 16x2 LCD display with I2C board.
3. This BMS board.
4. SMTS-101-Sub Miniature Toggle Switch-2Pin (ON-OFF)
5. This LoRa module.
6. This 18650 cell.
Use M2x5 screws with this. The screw holes come un-tapped.