Phone Stand (No AMS/MMU) - Lower Angle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stand is designed to accommodate larger phones and a lower angle for comfortable viewing. Accents printed separately
- Ocena
- 0 / 5
- Polubienia
- 123
- Pobrania
- 617
- Wydruki
- 1
- Wyświetlenia
- 2199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed
No MMU or AMS is needed for dual-color print.
Printed with 0.6mm (0.4mm also works) nozzle. 2 walls, 0.3 layer height (or 0.2 for 0.4mm nozzles), 20% gyroid infill. Can increase infill amount for more weight.
If the accent inserts are slightly loose, just a small drop of super glue/cyanoacrylate glue will work on the bottom of the accents.