Ghost 2.5" FPV Frame — TPU Bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU parts for the Ghost 2.5" FPV frame.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
TPU parts for the Ghost 2.5" FPV frame. All parts designed for the 3mm bottom plate. A separate folder of 2mm variants is included for pilots running the thinner plate.
CANOPIES
Five canopy options, all 25 degrees.
Beta FPV C03 25deg 8mm and 14mm standoff
C03 25deg 8mm and 14mm standoffs with Kozak Fin
DJI O4 Air Lite canopy fits the stock camera.
DJI O4 Air 03 lens mod 25deg
The four Flywoo O4 variants cover standard, chin, ND filter, and chin plus ND filter. The chin versions hold an Immortal T ELRS antenna underneath the camera.
ND variants accept a Flywoo ND filter.
BUTT PLUGS (rear connector and antenna holders)
XT30 antenna holder inline v2 holds your XT30 connector and antenna.
BT3 and antenna holder v2 holds your BT3 connector and antenna.
Added 20mm versions so you can cut it down to size for the stand off you need.
ANTENNA HOLDERS
Two standalone antenna mount options. The circular antenna case is a round enclosure for patch or circular antennas. The antenna holder is a simpler open mount.
BOOTS AND CLAWS
Arm tip protection in two styles. Claws cover the motor mounts with a wider contact patch and more grip. Boots wrap the arm tips for crash protection. Both come in standard and zip tie variants. The claw beta fpv motor variant is sized for BetaFPV motors. A 3MF file with print settings is included for the boots ziptie version.
2MM VARIANTS If you are running a 2mm bottom plate instead of 3mm, this folder has boots, boot zip tie, claw, and claw zip tie versions sized to fit.