Better 9 port siren

I made a better 9 port siren! Here are the instructions on how to build this:

1. Print the parts.
2. Get the motor.
3. Get paper plates.

This project uses an XD-3420 12VDC motor. Here is the link: https://www.amazon.com/Permanent-Grinding-Equipment-Mechanical-12V3000rpm/dp/B07T7P879K/ref=sr_1_3?adgrpid=1337006703920806&dib=eyJ2IjoiMSJ9.moTvUPS0lIK-sW5rnzpZXBdqPbqV3sU3N4iRHlgMhCRbe0pGb3G15omZRq8ui0XROdQUadUDexJL7NXYELr3JkY1E7xRHHrUiosrzmrX-NS7e12lO3I-F2P0qJq0YkdYT9wBz9RHyIwJ5tlgQHJuCA.xtMDXdHKelxzcuMHAro7QLrkZW4Z6jPptUP2M8x2aUk&dib_tag=se&hvadid=83563158020298&hvbmt=be&hvdev=c&hvlocphy=50243&hvnetw=o&hvqmt=e&hvtargid=kwd-83563265733043%3Aloc-190&hydadcr=10041_13480499&keywords=xd-3420&mcid=9078aa7b56d43a64a1ea9695095b0c02&qid=1760562519&sr=8-3 (jesus that is a long link-)

If you have the parts and the motor, great! 

1, use a sottering gun to make the motor mounting holes wider on the stator. (You can use the small mounting bolts if you want.) 2, mount the motor on the stator. Use glue to make the mount better. 3, put the chopper on the motor shaft. Before putting the chopper on the motor, use super glue to hold on better. 4, (this part isn't needed if the mounting thingys on the motor are secure enough to the stator) get some glue to hold in the motor. 5, get the paper plate mounting sticks and glue the mountings sticks to the stator evenly in rows of 2. 6, glue the other paper plates to the other parts. 7, let the glue dry! If everything went well, then you have a 9 port siren! (when you put the chopper on the motor, put a washer and then put the bolt onto the shaft if there is enough space.)