1 / 2
1515 Aluminum Extrusion End Fitting for 3/8" Tripod Head — zdjęcie 1
1 / 2

1515 Aluminum Extrusion End Fitting for 3/8" Tripod Head

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fitting to mount a standard 3/8" tripod adapter to the end of a piece of 1515 aluminum extrusion.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

OK, bear with me here: this is an unusual use case, but it's very flexible and might be useful to you.

Most tripod heads use a standard 3/8-16 screw thread to attach to a tripod.  They're fairly interchangeable between tripods.  We're taking advantage of that fact to create a mount out of 1515 aluminum extrusion (note that that's 1.5" by 1.5", not 15cm by 15cm).

Why would you want to do such a thing?  Well, this lets you mount a camera (or other item which can mount to a tripod head) to aluminum extrusion, which in turn can mount to just about anything.  In my case, I had a huge, heavy tripod base for an old telescope which is great for holding things steady and safe when kids are running around.  Using this arrangement, I can use a cheap photo tripod head and a nice but small telescope to show the moon and planets to kids, and I don't have to worry about them knocking things over.

Alternatively, if you have a lab setup with a laser or camera or optics or whatever which you need to be adjustable but also semi-permanently mounted, this will do the trick.

Enough explanation of use.  Let's talk about printing.  Use whatever filament makes sense for your use.  I used PETG and infill of 25%, and I upped the perimeters to four.  Seems fine.  This is a TIGHT fit on the extrusion; you'll probably have to tap it on with a mallet.  You'll need a two-inch-long 3/8" bolt to mount the tripod head.

Tagi