1515 Aluminum Extrusion End Fitting for 3/8" Tripod Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fitting to mount a standard 3/8" tripod adapter to the end of a piece of 1515 aluminum extrusion.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
OK, bear with me here: this is an unusual use case, but it's very flexible and might be useful to you.
Most tripod heads use a standard 3/8-16 screw thread to attach to a tripod. They're fairly interchangeable between tripods. We're taking advantage of that fact to create a mount out of 1515 aluminum extrusion (note that that's 1.5" by 1.5", not 15cm by 15cm).
Why would you want to do such a thing? Well, this lets you mount a camera (or other item which can mount to a tripod head) to aluminum extrusion, which in turn can mount to just about anything. In my case, I had a huge, heavy tripod base for an old telescope which is great for holding things steady and safe when kids are running around. Using this arrangement, I can use a cheap photo tripod head and a nice but small telescope to show the moon and planets to kids, and I don't have to worry about them knocking things over.
Alternatively, if you have a lab setup with a laser or camera or optics or whatever which you need to be adjustable but also semi-permanently mounted, this will do the trick.
Enough explanation of use. Let's talk about printing. Use whatever filament makes sense for your use. I used PETG and infill of 25%, and I upped the perimeters to four. Seems fine. This is a TIGHT fit on the extrusion; you'll probably have to tap it on with a mallet. You'll need a two-inch-long 3/8" bolt to mount the tripod head.
