1 / 9
79-89 Fox Body Mustang Steering Hub Cover — zdjęcie 1
1 / 9

79-89 Fox Body Mustang Steering Hub Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A steering column hub cover to fill in gap between a NRG quick release and the steering column trim on a 79-89 Mustang.

Ocena
0 / 5
Polubienia
5
Pobrania
11
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A steering column hub cover to fill in gap between a NRG Race Hub quick release and the steering column trim on a 1979-1989 Fox Body Mustang. It's a basic model and will need a bit of high build primer and paint to look OEM.

It fits both Tilt and Non-tilt steering column trim. It has an slight oval to the inner ring to accommodate for the larger lip on the top of the steering column trim I placed a star at the top position so its easier to orientate. Mine popped into place without anything need to hold it in place but would suggest some double side tape to keep it from accidentally falling off.

I printed it out in Elegoo ASA Black filament. On a Elegoo Centauri Carbon with 0.2 layer height with a 0.4 mm Brass-Hardened Steel tip

Tagi