1 / 9
79-89 Fox Body Mustang Steering Hub Cover — image 1
1 / 9

79-89 Fox Body Mustang Steering Hub Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A steering column hub cover to fill in gap between a NRG quick release and the steering column trim on a 79-89 Mustang.

Rating
0 / 5
Likes
5
Downloads
11
Makes
0
Views
80
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

A steering column hub cover to fill in gap between a NRG Race Hub quick release and the steering column trim on a 1979-1989 Fox Body Mustang. It's a basic model and will need a bit of high build primer and paint to look OEM.

It fits both Tilt and Non-tilt steering column trim. It has an slight oval to the inner ring to accommodate for the larger lip on the top of the steering column trim I placed a star at the top position so its easier to orientate. Mine popped into place without anything need to hold it in place but would suggest some double side tape to keep it from accidentally falling off.

I printed it out in Elegoo ASA Black filament. On a Elegoo Centauri Carbon with 0.2 layer height with a 0.4 mm Brass-Hardened Steel tip

Tags