Kingroon KP-3 Power supply feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power Supply Mount (base) for Kingroon KP-3 These are bases functioning as big rubber feet for the power supply of…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Power Supply Mount (base) for Kingroon KP-3
These are bases functioning as big rubber feet for the power supply of KP-3.
The stock power supplies of this printer are in metal cases that normally a power supplies have with it.
The problem is that they have no cushion or rubber feet to prevent scratching the surface it shits on. So you can't be along with them in your living room.
This thing contains two models. One for metal side, another for plastic side of the Kingroon power supply. You should print both for a supply.
I printed them in TPU filament but there is some margin along the groove so you could print any material you like.
Kingroon KP-3電源ベース
Kingroon KP-3の電源は金属むき出しで、普通の机に置いたら傷だらけになります。ゴム足とか買ってきてもいいんですが、さっとプリントして使っておけば安心！
自分はTPUでプリントしましたが、サイズに微量の余裕があるので他のフィラメントでも使用できるものがプリントできると思います。
Print Settings
Printer:
Kingroon KP-3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2-0.4
Infill:
any
Filament:
any TPU, PETG, or what you like
any
Category: 3D Printer Accessories