1 / 8
Hoselink Tap Connector Spanner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple spanner that fits perfectly over the small teeth on the connector, making it much easier to unscrew
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I found the Hoselink Universal Tap Connector (the part that screws onto the garden tap) difficult to undo, especially when wet or tightened firmly. I designed this simple spanner/wrench that fits perfectly over the small teeth on the connector, giving you much more leverage to easily unscrew it.
Note: this is sized only for the standard 12mm hoses.
Print settings:
- Material: Bambu Matte PLA (Charcoal)
- Layer height: 0.2mm
- Wall loops: 6
- Top shell layers: 6
- Bottom shell layers: 5
- Sparse infill density: 25%
- Sparse infill pattern: Gyroid
- No supports needed!
