ARNIEPADS 0.1 - Ultra Light Knee Armor - Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight kneepad insert for work pants.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Kneepad inserts for usage in work pants, military pants, etc, based off the NASA fabric hexagons rendition created by @Keeeal_40260 :: https://www.printables.com/model/15241-nasa-fabric-hexagons
The “ULKA” will be removed in a later version as it is an existing company.
Print in 95A TPU - or for a rougher feel print in alternative filaments such as PA6/12-CF or PA6/12-GF (for totally non-conductive use)
Measurements:
Width: ( 4.9" ) 125mm
Height: ( 9.3" ) 236 mm
393 MB model so it will take a long time to slice. I will simplify the model later after testing.
Future ideas:
- Replaceable honeycomb plate inserts that go into the tpu plate sections, so printed nylon plates can be folded into the Tpu & used as a hardstop to prevent screws, nails, hard rocks etc from puncturing through spongey Tpu and into your knee
- Option 2 would be pause print command, where 3d printed carbon fiber nylon plates are inserted then the print is continued - achieving the same result without the option for user serviceability but providing a more rugged initial setup