Gravity Infuser (Gravity Bong)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
V2 exclusively available on MakerWorld
A fully 3d printed Gravity infuser (Even the O-Ring) that doesn't leak and all you'll need is a 14mm bowl.
Print list of what you need
- 1 Body
- 1 Mouthpiece (long or short)
- 1 14mm Stem (long or short)
- 1 Valve (with or without seals)
- 2 Jars (round or flat)
- 2 Stems
- 2 Legs
- 2 Washers
- 2 TPU O-Ring (16.1mm or 16.2mm)
- 2 Connectors
The TPU O-Rings can be tricky to get on the valve. I found stretching over with a small screwdriver works best. You can also buy O-rings if your printer cant print TPU. I also included a valve that doesn't use seals at all. Even without the seals I find it to hardly drip if at all.