Y stepper motor wedged spacer for Ender 3 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This angled/wedged spacer set allows you to correctly align the Y stepper motor to the Y axis on your Ender 3 Pro.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 2211
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This angled/wedged spacer set allows you to correctly align the Y stepper motor to the Y axis on your Ender 3 Pro. It fits between the Y motor bracket and the 40x40 mm Y axis aluminium profile. The wide cut-outs make sure that it does not touch the belt. There are three angles to choose from (0.5°, 0.75° and 1°), which should cover most printers.
To install, loosen the three screws in the bracket, slip in the spacer and screw them back in. Then check, if the angle between your stepper motor axle and the Y axis (belt) is exactly 90°. If not, try a different spacer or add a second one.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.08 mm
Infill:
None
Filament: Generic PLA
Notes:
Print with high Z resolution, to make sure that the angle is correct. For the same reason, you should also make sure that your bed is perfectly level for this print.
Category: 3D Printer Parts