1 / 5
Y stepper motor wedged spacer for Ender 3 Pro — image 1
1 / 5

Y stepper motor wedged spacer for Ender 3 Pro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This angled/wedged spacer set allows you to correctly align the Y stepper motor to the Y axis on your Ender 3 Pro.

Rating
5 / 5
Likes
32
Downloads
180
Makes
1
Views
2,211
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This angled/wedged spacer set allows you to correctly align the Y stepper motor to the Y axis on your Ender 3 Pro. It fits between the Y motor bracket and the 40x40 mm Y axis aluminium profile. The wide cut-outs make sure that it does not touch the belt. There are three angles to choose from (0.5°, 0.75° and 1°), which should cover most printers.

To install, loosen the three screws in the bracket, slip in the spacer and screw them back in. Then check, if the angle between your stepper motor axle and the Y axis (belt) is exactly 90°. If not, try a different spacer or add a second one.

 

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.08 mm

Infill: 

None

Filament: Generic PLA 
 

Notes:

Print with high Z resolution, to make sure that the angle is correct. For the same reason, you should also make sure that your bed is perfectly level for this print.

 

Category: 3D Printer Parts

Tags