Spool Bracket for Cabinet, Closet or Wine Fridge (EMT rods)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some mounts for 1/2" EMT rods to hold your spools. I used an old wine fridge, bought cheap on Craigslist.…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Some mounts for 1/2" EMT rods to hold your spools. I used an old wine fridge, bought cheap on Craigslist. Refrigerators are perfect for this because they seal well and are readily available used for not much money.
A rotary desiccant dehumidifier in the cabinet keeps humidity < 10%.
Print 2 of each for each rack. Screw the hanger into the wall of the fridge. Cut 1/2" EMT to length. Slip the caps over the EMT, then slide them over the hanger. They should friction fit in place. If not, a dab of glue will secure them.
I printed them in SnoLabs PC+. They have been in use for over a year without issue.
F360 file added if you wish to modify.
Category: 3D Printer Accessories