Spool Bracket for Cabinet, Closet or Wine Fridge (EMT rods)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some mounts for 1/2" EMT rods to hold your spools. I used an old wine fridge, bought cheap on Craigslist.…
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 37
- Makes
- 0
- Views
- 1,031
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Some mounts for 1/2" EMT rods to hold your spools. I used an old wine fridge, bought cheap on Craigslist. Refrigerators are perfect for this because they seal well and are readily available used for not much money.
A rotary desiccant dehumidifier in the cabinet keeps humidity < 10%.
Print 2 of each for each rack. Screw the hanger into the wall of the fridge. Cut 1/2" EMT to length. Slip the caps over the EMT, then slide them over the hanger. They should friction fit in place. If not, a dab of glue will secure them.
I printed them in SnoLabs PC+. They have been in use for over a year without issue.
F360 file added if you wish to modify.
Category: 3D Printer Accessories