IKEA Fyrtur Endstops - Flush Side Mounting w/ Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End stops for Ikea Fyrtur blinds, with optional spacers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to print end stops for my blinds, but my old windows are geometrically difficult. These were promising, but I have to mount them on the sides - fired up TinkerCad and here we are!
Included 5mm spacers in case you have JUST enough room to mount them, but the hooks still don't reach. Scale the spacers to whatever height you need for your windows.
Printed in CR-PETG with 40% infill, super strong.
V2 Update 10/31/2025:
These work great, but sometimes the blinds don't hit the opening just right, and get stuck on the bottom of the hook - sometimes they also don't stay centered between them, so I added fabric retention holders similar to other models. Also and tapered the bottom of the mount and added a radius to the outer edge of the hook to hopefully promote seating in the hook properly.