GIRO - Bed Leveling Wheel / Thumb Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GIRO - Bed Leveling Wheel / Thumb Nut General This is a newly designed Bed Leveling Knob for several 3D printers. It…
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 359
- Wydruki
- 0
- Wyświetlenia
- 2849
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO - Bed Leveling Wheel / Thumb Nut
General
This is a newly designed Bed Leveling Knob for several 3D printers. It uses a M3 thumb nut for M3 screws. If your Heatbed doesn't use M3 screws than this bed leveling wheel can't be used.The outer diameter of the bed leveling wheel is 35mm.
You will need additional thumb nuts for these knobs.
Additional Parts
4x DIN 466 M3 Thumb Nuts
History
Version 1.0
This is the first intended prototype and design.
Printing
I would recommend to use at least 2 perimeters. Print with a lower speed, for example 30 mm/s, to get a more accurate printing. I recommend to print it with at least 50% Infill. Support structures are needed.
Additional Information
Let me know if there are any kind of problems with the bed leveling wheel. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bed levelingm wheel.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work. For all of you who gave me a tip.
