1 / 5
Magnetic holder for fastening a greenhouse door — zdjęcie 1
1 / 5

Magnetic holder for fastening a greenhouse door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic holder for fastening a greenhouse door

Ocena
0 / 5
Polubienia
6
Pobrania
7
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Magnetic holder for securing a greenhouse door. You will need four round magnets with a diameter of 12 mm and a thickness of 2.7 mm (e.g. from Aliexpress). Since neodymium magnets cannot withstand rain and moisture, I wrapped them in packing tape. I glued the magnets to the 3D-printed holders (Pattex). I stuck the printed holders to the aluminium profiles of the greenhouse using strong double-sided adhesive tape.

Magnethalter zur Befestigung einer Gewächshaustür. Benötigt werden vier runde 12mm im Durchmesser fassende und 2,7mm dicke Magnete (z.B. von Aliexpress). Da Neodym Magnete kein Regen und Feuchtigkeit aushalten, habe ich diese in Packband bewickelt. Die Magnete habe ich mit den 3D gedruckten Halten verklebt (Pattex). Die gedruckten Halter habe ich mit kräftigen doppelseitigen Klebeband an die Aluprofile des Gewächshauses geklebt.

Tagi