1 / 1
Vacuum Hose Adapter 1-3/4" to Milwaukee Random Orbit Sander — zdjęcie 1

Vacuum Hose Adapter 1-3/4" to Milwaukee Random Orbit Sander

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect your 1-3/4" shop vac hose to a tool with a ~2-1/4" inner diameter port.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
1
Wyświetlenia
113
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This 1-¾" vacuum hose adapter is based on an older (~2010) Ridgid shopvac, and was designed to fit an older (~2009) Milwaukee (corded) random orbit sander.
It can be used to plug any ~1-¾" hose inside any ~2-¼" port.

The design is a cylinder with a tapered shell to allow clearance at the opening and a good sealed interference fit as you press in the hose and/or adapter.

Shop vac model: Ridgid WD1636 Wet/Dry Vacuum, 1-¾" outer diameter hose
Sander model: Milwaukee 6021-21 5" Random Orbital Sander, <2-¼" inner diameter port

Tagi