1 / 1
Resin Vat Lid for Anycubic Photon Mono 4 / 4 Ultra — zdjęcie 1

Resin Vat Lid for Anycubic Photon Mono 4 / 4 Ultra

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UV-blocking lid for Anycubic Photon Mono 4 & 4 Ultra vats – prevents daylight curing and keeps dust out.

Ocena
2,5 / 5
Polubienia
24
Pobrania
394
Wydruki
1
Wyświetlenia
1141
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a UV-blocking cover for the resin vat compatible with Anycubic Photon Mono 4 and Photon Mono 4 Ultra.
The default printer cover is semi-transparent and allows daylight UV to pass through, which may cause the resin to partially cure in the vat when the printer is not in use.

✅ Features:

Specifically designed for Photon Mono 4 / Mono 4 Ultra

Blocks daylight and ambient UV to prevent accidental curing

Protects the vat from dust, debris, and insects

Keeps resin usable for longer between prints

No supports needed – fast and easy 3D print

Opaque walls for maximum UV protection

🛠 Recommended Print Settings:

Material: PLA or PETG

Layer Height: 0.2 mm

Infill: 15–20%

Supports: Not required

Orientation: Print flat for smooth top

📏 Compatibility:

✅ Anycubic Photon Mono 4

✅ Anycubic Photon Mono 4 Ultra

Tagi