1 / 7
Dan A4 H2O Insert for Peli iM3100 - Tailored to 3D Scanning — zdjęcie 1
1 / 7

Dan A4 H2O Insert for Peli iM3100 - Tailored to 3D Scanning

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable Insert for Peli iM3100 case to hold Dan A4 H2O with accessories tailored to 3D scanning setups

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
316
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Works together with my A4 H2O bumpers: https://www.printables.com/model/1459646-dan-a4-h2o-bumpershttps://www.printables.com/model/1459646-dan-a4-h2o-bumpers

I designed this case insert to have a nice way of securely storing all my PC and scanning accessories like marker spray, cabling, marker geometries, more cables and Quest 3 (used for AR passthrough while scanning). The inserts can be printed from TPU or machined from hard foam (haven't tried yet).

A nice addition is a travel router to use as an access point for remote desktop connections to my PC. Therefore I don't need to bring a monitor or keyboard and mouse: https://www.printables.com/model/1407747-tp-link-wr902-ac-ac750-tpu-bumper-casehttps://www.printables.com/model/1407747-tp-link-wr902-ac-ac750-tpu-bumper-case

BOM

  • Peli iM3100 Storm Long CaseiM3100 Storm Long Case
  • ~5kg of TPU (depends on walls and infill)
  • Superglue to join printed segments
  • Hotglue to fasten prints in Peli case

Printing

Large TPU prints require a properly tuned 3D printer, I used my K2 Plus with a 0.6mm shim to decrease the extruder grip and am able to use a flow rate of 20mmm3/s. To keep the material usage as low as possible I used a 0.8mm nozzle with only one wall and 12% infill.

Assembly

Use superglue to glue the segments together and afterwards secure them in the case with hot glue.

Tagi