Liczymy pasujące modele…
This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
A “ball-and-stick” model of water molecule. Although there is a potential of making other molecules, only H2O has been specifically considered, i.e., bond angle is 104.45° and H-O distance is 95.84 pm × 10^9 (=95.84 mm) as in default…
What is the most obvious thing to do when the handle of your drawer breaks off? Replace it with a push to open mechanism ;) Replace or extend your drawers with the convenient push2open mechanism. The drawers should have rails. it is also…
Introducing the first in my Cursed Connectors series: the H2O to HDMI Adapter! This 3D printed garden hose to HDMI adapter is the ultimate powerful streaming solution. Dispense high bandwidth water with this cutting-edge adapter. Design:…
Corsair SF750 PSU holder, designed without fan grilles to reduce noise from turbulence. It features a 1cm lower offset to minimize AIO tubing bends.
You have to print two half molecules and paste them. Be water my friend. Category: Keychains
OptimumTech sparked some really cool builds around the FLT-80 reservoir, but the inverted holder relied heavily on having a straight connection to the GPU. I did designed a new holder that holds the FLT right side up, resulting in a…
Mounting system to adapt Biqu h2o extruder setup to stock Voron 2.4 x carriage.
Note that the model is far from being perfect; but it works! I use this plate for my Ender5 ZeroG Mercury mod Core XY but the faceplate should work ok with other types. Compatible with older EVA 2.4+ system only!
A simple KlickFast stud to fit Motorola T92 H2O handheld PMR radios. Fit confirmed with official Peter Jones KlickFast docks. Print settings Orientation: 90º rotation (as screenshot) Material: PETG/ASA (for strength) Nozzle size: 0.6mm…
I noticed my SSD temperatures were high (70 degrees) and others, with the same case, had the same issue: https://www.reddit.com/r/sffpc/comments/t72zj8/extra_fan_on_a4h2o/ I, therefore, designed a mount for an 80 x 80 x 25 mm fan that…
Motorola talkabout T92 H2O belt clip. Just replace the original black hanger with the belt clip.
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
dont forget to scale model, printed mine in ABS best used with reverse psu mount which is also available I do not consent to the sale of this model or any of its remixes in digital or physical form.
for 80mm 10t fans u get around 5mm clearance from the side pannel to the fans so theres no turbulant noise uses m3 and nuts for fan mounting and m2 screws check m.2 ssd clearance u can use supports and print in one peice if u dont want…
Mount base for the ZE08-CH2O formaldehyde sensor and optional Buzzer module designed to be used with the 3D Printer Emission Sensor Array (SensorBox V2) . The original design attached the sensor directly to the carrier module using…
Yes, the drag chain is wayyyy to big (15x40) but it won't flex as much in time.
The frame is mostly designed to: 1. Support 120mm (15mm thick) fans 2. Support case weight and heat (PETG) 3. Avoid piercing or damaging the case 4. Avoid hot airflow being sucked from the sides 5. Have a stock / natural look and feel…
Based on the Kobo Aura 2 cover by Mikeller. Found out after printing that, that the Aura H2O 2 is a different size. Also added an extra cover to keep the power button from being pressed. I printed it flat, but then it needs support; you…
H2O Molecule - Learning Model With Letters
melt hex nuts into place to keep them in place dont forget to scale model picture is from original model with atmos 1 I do not consent to the sale of this model or any of its remixes in digital or physical form.
A fun teaching tool to show H2O in all its states of matter. fun and interactive
Simple mounting bracket for the D-D H2Ocean P4 Dosing Pump. Printing: A dosing pump is expensive, print this model with lots of infill and walls. Also print it in such a way that the smaller holes are on the printing plate. Installation:…
Works with my Peli insert: https://www.printables.com/model/1459738-dan-a4-h2o-insert-for-peli-im3100-tailored-to-3d-shttps://www.printables.com/model/1459738-dan-a4-h2o-insert-for-peli-im3100-tailored-to-3d-s I designed these bumpers…
Water is the molecule every chemistry class starts with: one oxygen bonded to two hydrogens, bent at about 104.5 degrees. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard…
A set of 8 labeled ball-and-stick molecule models everyone meets in daily life - from water and carbon dioxide to caffeine and aspirin. Every atom is a sphere in standard CPK colors with its element symbol plus proton and neutron counts…
Works together with my A4 H2O bumpers: https://www.printables.com/model/1459646-dan-a4-h2o-bumpershttps://www.printables.com/model/1459646-dan-a4-h2o-bumpers I designed this case insert to have a nice way of securely storing all my PC and…
Maleic Anhydride (C4H2O3, CAS 108-31-6) — a free educational 3D molecular model for teachers and students, by MolGod.org. No legend required: the element symbol is engraved on each atom. Teachers who print molecules quickly meet the same…
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
dont forget to scale model, printed mine in ABS best used with reverse psu mount which is also available I do not consent to the sale of this model or any of its remixes in digital or physical form.
for 80mm 10t fans u get around 5mm clearance from the side pannel to the fans so theres no turbulant noise uses m3 and nuts for fan mounting and m2 screws check m.2 ssd clearance u can use supports and print in one peice if u dont want…
melt hex nuts into place to keep them in place dont forget to scale model picture is from original model with atmos 1 I do not consent to the sale of this model or any of its remixes in digital or physical form.
My own designed UNO boxes. I have designed 6 versions for UNO, UNO-FLIP, UNO-WILD, UNO NO MERCY, UNO-H2O and ONO 99. I am happy to create other versions on request. To get a complete box you have to print a UNO-Underside and a UNO-Lid…
Meet the H2O No-Go Cap, the latest addition to my hose utility series of designs. This 3D printed garden hose cap is your perfect companion for stopping water flow, testing for leaks, or sealing off an unused hose end. Design: This…
A card box for the card game “UNO H2O” (only “H2O” variant) that replaces the awkward plastic hood that destroys the cards over time. The card deck sits flush without any play to the sides of the box. The lid closes tight over the outside…
remix of the offset bracket slightly changed design for better 3d printing dont forget to scale before printing
only 3.1mm higher than original feet uses original screws just print & fit, nothing extra needed except: m.2 to oculink adapter: https://www.aliexpress.us/item/3256809109572412.html and your own anderson powerpoles & cables. SCALE MODEL…
You can use this clip to safely mount the hose and cable of your D-D H2Ocean automatic top off system to a bucket as shown in the photo. Print in PLA or PETG with a bit of infill (15-20%). Su supports required.
H2O: https://pihrt.com/elektronika/350-attiny-85-alarm-vyteceni-vody Jistě znáte situaci vytopení sousedů, nebo bytu vodou... Tento obvod s procesorem ATtiny 85 za "pár korun" řeší tyto nepříjemnosti. Obvod obsahuje pouze baterii CR2032…
I tried some boxes I found online but could not find one that fit my need ... I liked the "Playing Card Box" by "mkoistinen" so I designed my own version of a Uno Pocket Card box based upon his Playing card box. I later added an…
Biqu H2O mount for ender 5 pro. Mount that requires drilling holes - easy enough as the ender mount is aluminium. Prefer the extruder assembly mounted to carriage with capscrews rather than hanging off the plastic mount. Wire relief -…
this locket is from the show h2o with the names ingraved in it
My own designed UNO boxes. I have designed 6 versions for UNO, UNO-FLIP, UNO-WILD, UNO NO MERCY, UNO-H2O and ONO 99. I am happy to create other versions on request. To get a complete box you have to print a UNO-Underside and a UNO-Lid…
-The Wandgardium H2Osa is a water hose attachment that lets you create magic with water using a wand-like device. It has a white plastic handle with a textured grip and a pointed tip that can produce a clean, drinkable jet of water. -You…
It is a coaster for a mug or cup of tea or coffee with a picture of a water molecule.
Biqu H2O pipe clamps to prevent water flowing everywhere when disconnecting pipes to work on extruder. 10 minute print for 2. 2g filament - any filament. Infill 20% No support. If you have a h2o, check your plastic end for cracking -…
Thanks to the maker of the original. I just resized it for my Aliexpress knock off UNO-set. Printed in black and red PLA, without top/bottom-layer, and with honeycomb infill.
