1 / 2
QIDI Q2 Part Cooling Fan Upgrade to BambuFan — zdjęcie 1
1 / 2

QIDI Q2 Part Cooling Fan Upgrade to BambuFan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

QIDI Q2 Part Cooling Fan Upgrade

Ocena
5 / 5
Polubienia
124
Pobrania
286
Wydruki
2
Wyświetlenia
6384
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This modification is at your own risk.

Upgrade the Q2's part cooling fan to a Bambu X1 or P1 fan. 

Transplant the Q2 cable to the bambu fan.
 At this time, cross the two cables on the left. 
The fan power will be overwhelmingly strong, so care should be taken when setting the cooling for filaments that do not require much cooling. 

I purchased a third-party fan from AliExpress and I think it works well.
The Q2 fan is very weak at 0.1A. Both the original Bambu fan and the fan I purchased this time seem to be 0.22A.
 https://ja.aliexpress.com/item/1005009411635155.html

The overhang test was performed without an auxiliary fan, and the layer pitch was left at the standard setting of 0.2mm.

This overhang test model is a compact model designed to save time.

Tagi