1 / 6
Super Deluxe Paracord Melting Form – Print-in-Place Remix — zdjęcie 1
1 / 6

Super Deluxe Paracord Melting Form – Print-in-Place Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy print-in-place version – no assembly needed! Neat paracord ends made simple.

Ocena
0 / 5
Polubienia
24
Pobrania
87
Wydruki
1
Wyświetlenia
319
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Here’s my print-in-place remix of the awesome Super Deluxe Paracord Melting Form!
I really liked the original design, but I wanted something even easier to use — so this version prints fully assembled, no extra parts or screws required.

Just print it, grab your paracord, and start melting those ends clean and smooth.
Perfect for bracelets, lanyards, or any paracord project where you want tidy, tapered ends that fit through tight holes.

How to use

Feed the paracord through the slot or channel in the form.

Leave a few centimeters of cord sticking out on the melting side.

Gently melt the end with a lighter or heat source until it softens and begins to form a bead.

While still warm, pull the cord through the form in one smooth motion.
→ This shapes the tip into a slim, neat point that fits easily through tight holes or weaves.

Let it cool — done! You’ll get a clean, durable, professional-looking finish.

Tips:

Work in a well-ventilated area.

Don’t overheat; just enough to soften the nylon.

Works great with 550 paracord or similar sizes.

Practice on a scrap piece first to get the timing right.

 

What’s new:

Fully print-in-place – no assembly at all

Same great function, faster to get started

Works great with standard 550 paracord

 

 

Layer height: 0.2 mm

No supports

Print flat on the bed

PETG

Have fun printing, and enjoy those super-clean paracord ends!

Tagi