RAKwireless Wismesh Pad V2

This enclosure is an alternative for the RAKwireless WisMesh Tap and the upcoming WisMesh Tap V2.

EDIT
Fixed original model which had a small glitch in the area where the TFT is mounted.

It is slimmer and lighter than the original Unify enclosure of the WisMesh Tap, but it lacks of course the IP65 water protection.

It uses the following RAKwireless WisBlock modules:

• RAK4631 + RAK19007 Base Board as WisMesh Starter Kit

• RAK12501 GNSS location module

• RAK14014 TFT touch screen

The battery can be disconnected with an integrated battery switch. This solution is not perfect, as while switched off, the battery cannot be recharged, but it is still better than draining the battery while the device is not in use.

For the assembly 10 pieces of self-tapping screws 2mm diameter with a length of max 5mm are needed.

The used battery switch dimensions are in the documentation. If a different switch is used, the bottom part needs some adjustment.

• For RAK4631 you can flash firmware-rak_wismeshtap-2.6.11.60ec05e (or latest version) to make it a WisMesh Tap ==> https://store.rakwireless.com/products/wismesh-tap 

• For RAK3312, you can flash firmware-rak_wismesh_tap_v2-tft-2.7.12.45f15b8 (or latest version) to make it a WisMesh Tap V2.

If you can't find the firmware on the Meshtastic website, all firmware is available for download from their Github repo.    

You can get the file from their Github repo ==> https://github.com/meshtastic/firmware/releases/tag/v2.7.15.567b8ea

Get the file firmware-rak_wismesh_tap_v2-tft-2.7.15.567b8ea.bin from the proviced ZIP file https://github.com/meshtastic/firmware/releases/download/v2.7.15.567b8ea/firmware-esp32s3-2.7.15.567b8ea.zip