Pro Moto Billet Exhaust Cap Wash Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plug to keep water from getting into a muffler through a ~1.5625″/40mm ID PMB/Fastway Cap
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for the large Pro Moto Billet Exhaust Cap with ~1.5625″/40mm ID (fits KTM/Husky 350/501, maybe some other bikes too), since I didn't feel like paying $30 for their billet aluminum plug.
Fits a 32 x 4 mm o-ring, like this: uxcell Nitrile Rubber O-Rings 40mm OD 32mm ID 4mm Width, Metric Sealing Gasket for Automotive Machine Plumbing, Pack of 10.
Should fit quite snugly, so it may be used for transportation & storage in a rain. A piece of paracord, or a rope, or simply a zip tie can be threaded through the holes and used to pull the plug out.
Printed in PETG with the wider side down.
I recommend adding paint on supports on the o-ring slot upper side (see the screenshots) and a random seam alignment.