1 / 5
Ryobi P7131 Car Vacuum wall mount/bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount/bracket for your Ryobi P7131 Compact Car Vacuum.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 94
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple yet useful bracket/wall mount for the Ryobi One+ P7131 car vacuum cleaner. It should also work on any other Ryobi tools that use the same female receiver (see pictures) as the P7131.
I found a similar model somewhere else on the Internet, but the author only provided gcode files for a different printer, so I couldn't test that and decided to create this one from scratch.
Notes:
- Print on its side for added strength (see picture of the model in the slicer bed). Printing in it flat will cause the print to be weak on the lip connector, causing potential issues under load. You'll need supports for this to work.
- The backing plate is 5mm thick. It flexes a bit but seems OK with the weight of the vacuum and a 4Ah battery.
- This bracket assumes that the base of the vacuum will touch the wall (see pictures). It might need stronger walls and more infill if the base is not touching anything (as in hanging it on a horizontally laid 2 by 4).