Cable Management Box

M E G A • U P D A T E • 09/27/2023

Added v2 with cantilever clips for an all printed design, no M3 screws needed! 

There is a slot for M3 screws next to the clip opening as a backup should you have issues with the clip so you don't have to print a whole new M3 screw fastener version.

Update files are available under the v2 folders. M3 screws v1 version still available if you're into M3 screws. 😃 

Also added more sizes! If you need a specific size, let me know in the comments and I'll see what I can do.

D I M E N S I O N S • (Length x Depth x Height) in inches

Use the following sizes for reference in the folder labels.

Average size of cable organization box on the market

• (SIZE R) 15.7 x 5.8 x 5.3
• (SIZE RS) 15.7 x 3.94 x 5.3

Fits MK3/MK4 build plate

• (SIZE MK3) 9.8 x 5.8 x 5.3 
• (SIZE MK3 S) 9.8 x 3.94 x 5.3

Fits PRUSA XL build plate

• (SIZE XL) 14.1 x 5.8 x 5.3

Bigger Version --→ https://www.printables.com/model/456383-cable-management-box-v2-cantilever-clip-fasteners-

H I G H L I G H T S

• Eight variations included. 
• Full version if your printer is big enough. 
• Sliced version (v1 and v2) for the average printer. 
• For v1, combine sliced box with at least 12mm length M3 screws(x3) and nut(x3). There's also a slim sliced version that's 100mm wide if you want a narrow box. 
• No M3 screws needed for new v2 cantilever clips version. Though there is still a slot for M3 screws in v2 version just in case.
• Two 250mm long version (Regular 147.32mm depth and SLIM 100mm depth) to fit MK3/MK4 printers.
• (v1) Lid doesn't need to be attached together, the separate lid pieces can just be placed on top. You can glue the lid pieces together if needed.
• The same lid end can be printed twice and use for both ends. This applies for both v1 and v2.

If the fitment of the clip is a little loose or tight, you should be able to scale just the clip to get your desire fit without reprinting the whole container.

**Test pieces included to check cantilever clip fitment. Print Base Right TEST, Base Left TEST, and two clips to check the fitment of the clips before printing the complete box.