1 / 3
Garmin Varia mounting bracket for Kickbike scooters — zdjęcie 1
1 / 3

Garmin Varia mounting bracket for Kickbike scooters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,25 € – 0,31 € netto (bez VAT)

Dla pliku: KB Varia Adapter assembly tool PLA_0.4n_0.2mm_PLA_MK4S_12m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,28 € netto (środek widełek).

Masa podana przez autora
5 g
Czas druku podany przez autora
12,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Garmin Varia mounting bracket for Kickbike scooter frames using disc brakes (tested with 160mm rotors, should fit 180)

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Garmin Varia mounting bracket for Kickbike disc brake scooter frames.

 

This is a highly modified remix of Tim Angus' files for Garmin interface.

Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug fit, requires a locking ring and an insert from Tim's files, and a shorter assembly tool.


How it mounts on the frame - PPA-CF slanted version

 

Files include regular layer orientation and slanted orientation to re-distribute forces a little bit better in the entire part both using minimalistic organic supports. Also as of today, the slanted model fits inner parts a little bit tighter, I might re-upload inserts for the regular one to adjust how tight the radar snaps into place.

Tried printing the body in PLA, PETG, which worked, but the PETG part snapped along the layer lines in Garmin mounting area using slanted model, thus re-printed in much stronger Bambu PPA-CF (files include G-code for PPA-CF) using my enclosed MK4S. The insert and locking ring can both be made out of PETG.


Printing PPA-CF slanted on my enclosed MK4S - single-pulley idler lever is a must

 

The assembly tool can be printed using a regular PLA

Feel free to print in other CF-filled materials, let me know, how it turned out.


back left to right: slanted cross-section, slanted without supports removed, regular x2, regular cross-section;
front: locking ring, PETG insert, PLA assembly tool;

 

PPA-CF printing recommendations (requirements in bold):

Nozzle temperature - 290°C
Bed temperature - 110°C
0.4mm hardened nozzle
Single-pulley idler lever for brittle filaments (can be found here for Core One, it's the same file, thanks ParasitKegel https://www.printables.com/model/1236396-single-wheel-nextruder-idler-lever-for-brittle-fil )
Enclosure
100% infill
Min layer height at 0.15mm all layers including the first layer
Print fan turned off, max 2-3% while printing bridges
Max volumetric speed 8mm^3/s
Max printing speed 80mm/s

Tagi