Garmin Varia mounting bracket for Kickbike scooters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garmin Varia mounting bracket for Kickbike scooter frames using disc brakes (tested with 160mm rotors, should fit 180)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Garmin Varia mounting bracket for Kickbike disc brake scooter frames.
This is a highly modified remix of Tim Angus' files for Garmin interface.
Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug fit, requires a locking ring and an insert from Tim's files, and a shorter assembly tool.

How it mounts on the frame - PPA-CF slanted version
Files include regular layer orientation and slanted orientation to re-distribute forces a little bit better in the entire part both using minimalistic organic supports. Also as of today, the slanted model fits inner parts a little bit tighter, I might re-upload inserts for the regular one to adjust how tight the radar snaps into place.
Tried printing the body in PLA, PETG, which worked, but the PETG part snapped along the layer lines in Garmin mounting area using slanted model, thus re-printed in much stronger Bambu PPA-CF (files include G-code for PPA-CF) using my enclosed MK4S. The insert and locking ring can both be made out of PETG.

Printing PPA-CF slanted on my enclosed MK4S - single-pulley idler lever is a must
The assembly tool can be printed using a regular PLA
Feel free to print in other CF-filled materials, let me know, how it turned out.
back left to right: slanted cross-section, slanted without supports removed, regular x2, regular cross-section;
front: locking ring, PETG insert, PLA assembly tool;
PPA-CF printing recommendations (requirements in bold):
Nozzle temperature - 290°C
Bed temperature - 110°C
0.4mm hardened nozzle
Single-pulley idler lever for brittle filaments (can be found here for Core One, it's the same file, thanks ParasitKegel https://www.printables.com/model/1236396-single-wheel-nextruder-idler-lever-for-brittle-fil )
Enclosure
100% infill
Min layer height at 0.15mm all layers including the first layer
Print fan turned off, max 2-3% while printing bridges
Max volumetric speed 8mm^3/s
Max printing speed 80mm/s