Diamondback Mini Sax X DBX Pouch Mount for DeWalt DXL Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Diamondback Mini Sax X DBX pouch securely on DeWalt DXL rails for quick, modular tool access.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This custom-designed mount allows you to attach your Diamondback Mini Sax X DBX pouch directly to DeWalt DXL rails. It provides a secure, slide-on fit that keeps your pouch steady while maintaining quick-release flexibility. Designed for professional builders and set crews who need fast tool swaps and organized setups on-site.
Building Instructions:
1. Print the model with the flat rail side on the build plate.
2. Use 20% infill.
3. Add supports under the locking lip and inner channel if your printer struggles with overhangs.
4. Test-fit on the rail before final use. Lightly sand or file any tight areas if needed.
5. Attach your Diamondback Mini Sax X DBX pouch and ensure it locks securely into place.
Print Tips:
• Recommended material: PETG or ABS for durability.
• Layer height: 0.2 mm.
• Wall thickness: 3–4 perimeters.
• For a snug fit, print at 100% scale. If rails are tight, scale the model down by 1–2%.
• Avoid PLA if exposed to heat or direct sunlight during work.