1 / 3
Custom Enclosure for Temperature Monitoring Device — zdjęcie 1
1 / 3

Custom Enclosure for Temperature Monitoring Device

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Original enclosure design for university project (temperature monitoring for thermal chambers)

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This custom enclosure was designed to house my thermal chamber monitoring project, built around an Arduino Nano, two MAX6675 thermocouple modules, and a 16×2 I²C LCD display. The purpose of the device is to monitor material/part temperatures inside a controlled thermal environment, using two probes to confirm when parts reach the same temperature as the surrounding air.
It includes mounting positions for:

  • Arduino Nano
  • 16×2 LCD (I²C version)
  • Two MAX6675 boards
  • Buzzer
  • Four push buttons
  • Four LEDs (channel indicators)

The enclosure was modeled for ease of assembly, both for the lid and case, and the parts that go inside them. It was the first time I worked with moving parts and tolerances. I will leave tips for other people that want to use my files as a starting point for their own projects:

  • Experiment with lid tolerances — I used a 0.2 mm difference for the lid, but would go slightly tighter on a second attempt.
  • If the LCD window or thermocouple cutouts print a bit snug, lightly sand or file the edges for a clean fit.
  • Always check the technical drawings or datasheets of your parts, as dimensions (especially for modules like the LCD or thermocouples) can vary slightly between manufacturers.
  • For the MAX6675 thermocouple boards, consider adjusting the side slots and mounting screw holes, as my original fit ended up a bit too tight.

 

Print Settings & Notes:

  • Dimensions (L x W x H): 160 x 114.2 x 45 mm
  • Printer Used: Prusa MK3S
  • Print Time: ~20h
  • Infill: 20%
  • Material: Black PLA from Sunlu
  • Assembly: secured with six M3×10-12 screws and hex nuts

Tagi