1 / 3
Custom Enclosure for Temperature Monitoring Device — image 1
1 / 3

Custom Enclosure for Temperature Monitoring Device

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Original enclosure design for university project (temperature monitoring for thermal chambers)

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This custom enclosure was designed to house my thermal chamber monitoring project, built around an Arduino Nano, two MAX6675 thermocouple modules, and a 16×2 I²C LCD display. The purpose of the device is to monitor material/part temperatures inside a controlled thermal environment, using two probes to confirm when parts reach the same temperature as the surrounding air.
It includes mounting positions for:

  • Arduino Nano
  • 16×2 LCD (I²C version)
  • Two MAX6675 boards
  • Buzzer
  • Four push buttons
  • Four LEDs (channel indicators)

The enclosure was modeled for ease of assembly, both for the lid and case, and the parts that go inside them. It was the first time I worked with moving parts and tolerances. I will leave tips for other people that want to use my files as a starting point for their own projects:

  • Experiment with lid tolerances — I used a 0.2 mm difference for the lid, but would go slightly tighter on a second attempt.
  • If the LCD window or thermocouple cutouts print a bit snug, lightly sand or file the edges for a clean fit.
  • Always check the technical drawings or datasheets of your parts, as dimensions (especially for modules like the LCD or thermocouples) can vary slightly between manufacturers.
  • For the MAX6675 thermocouple boards, consider adjusting the side slots and mounting screw holes, as my original fit ended up a bit too tight.

 

Print Settings & Notes:

  • Dimensions (L x W x H): 160 x 114.2 x 45 mm
  • Printer Used: Prusa MK3S
  • Print Time: ~20h
  • Infill: 20%
  • Material: Black PLA from Sunlu
  • Assembly: secured with six M3×10-12 screws and hex nuts

Tags