1 / 2
Laser Engraver Vacuum Chuck - Business Card Fixture — zdjęcie 1
1 / 2

Laser Engraver Vacuum Chuck - Business Card Fixture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small vacuum table for holding business cards flat while they're lasered.

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Needs six 24mm x 2.5mm fluoro rubber O-rings. Print, then clear the air holes with a 1.5mm drill and tap the port G1/4 straight thread for a G1/4 BSPP air line fitting. I lightly sanded the print scars off the top surface and painted with acetone to help seal it. 

Tagi