1 / 2
Laser Engraver Vacuum Chuck - Business Card Fixture
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small vacuum table for holding business cards flat while they're lasered.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Needs six 24mm x 2.5mm fluoro rubber O-rings. Print, then clear the air holes with a 1.5mm drill and tap the port G1/4 straight thread for a G1/4 BSPP air line fitting. I lightly sanded the print scars off the top surface and painted with acetone to help seal it.