1 / 9
Lens Hood - 58mm / Nikon AF-P 70-300mm f/4.5-6.3G — zdjęcie 1
1 / 9

Lens Hood - 58mm / Nikon AF-P 70-300mm f/4.5-6.3G

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A lens hood for a 58mm Lens / Nikon AF-P 70-300mm f/4.5-6.3G

Ocena
0 / 5
Polubienia
2
Pobrania
38
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I couldn't find a single screw on 58mm lens for my telephoto Nikon lens so I made one, I hope it works for you! Please be careful and slow the first few times you twist it on, it holds up for me but just incase with differences with printers. This model has very small room for error! Please make sure your printer is working correctly, and using a 0.4mm nozzle as I have not tried anything else. This was printed with overture pla pro, so it should be fine with mostly any PLA.

Tagi