AtomRC Gimbal v2 Drop In Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I fully designed this in Solidworks from the group up to convert the slide in style Gimbal v2 to a drop in style Gimbal.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I fully designed this in Solidworks from the ground up to convert the slide in style Gimbal v2 to a drop in style Gimbal.
There are 2 versions. One with threaded insert option and 1 you screw straight into plastic.
You will need to purchase the following hardware to convert this over:
Make sure you tune your holes!
Follow the build instruction playlist below!
Required so your camera does not fall out
2 - M3 x 10mm
M3 x 8 would work also. 6mm might be cutting it close.
Optional purchase if you want to upgrade:
1 - 4.3g metal gear servo similar to this:
M3 x 5 x 4 Threaded Inserts
Build guide! Don't forget to tune your holes below!
Very important and the holes in this project are really tiny! Check your holes :D
How I mounted the camera to the AtomRC Swordfish (Base plate added for Swordfish and Dolphin)
I tuned my holes by using this method: