1 / 1
Meccano compatible nut and bushing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nut and bushing for attaching a Meccano chain gear to an axle.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Family of mine was working on an Meccano project with a chain driven through a gear on an axle, but the nut to clamp the gear to the axle was missing. I printed them a new one and while at it, I also made them some bushings. These are both needed to attach this gear to an axle:
The assembly can be seen in the center of the main picture.
Nut
- Usage: it starts with an inner thread, but narrows, applying inward pressure when tightened
- Size (w x d x h): 23.4 x 20.3 x 11.1 mm
- Inner diameter of 9.6 to 16.0 mm
Bushing
- Usage: inserted into the gear and acts as a spacer between the axle and the gear
- Size (w x d x h): 9.5 x 9.5 x 6.3 mm
- Inner diameter: 4.4 mm
Printing
- Layer height: 0.2 mm
- As the parts are rather small, consider printing a bit slower than normal to compensate for low bed adhesion.
- Print the nut with the tapered inside facing the print bed.