Shell Cover For Framework 13 laptop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hard shell protective cover for Framework 13 laptop
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a protective cover for my Framework 13 Laptop similar to ones I have purchased for other models. no company makes one yet. This is a custom fit hardshell cover that still allows access to remove the modular ports. I recommend printing at 0.16 or 0.12 mm layer height. Some overhangs and very thin parts will benefit from extra layers.
ADDED: Split model for smaller printers. Due to the limited mating surface between the split parts. I have made flat joint pieces to help hold it together. It will require gluing. The largest piece is 233mm so it should print on 250mm print beds or larger. I haven't printed the split model yet so I appreciate feedback.
Updated V6 Fit refinement
Changes:
reduction in retaining clip size for less interference/better fit.
relocation of rear clips for less interference.
hole for audio jack.
side wall adjustments for a better fit.
Updated V5 Fit refinement
Changes:
Top and bottom reduced to 1.5mm (side walls still 2mm)
Reduced depth of the top lid for a tighter fit.
Over all tolerance improvements to improve fit.
Updated V4 Is thinner all over.
Changes:
Thinner, Original model was about 3.5mm thick. This one is 2mm thick.
Adjusted feet Hole location.
Corrected corner radius for a better fit.
Included a lid version with a thinner bottom edge.
Included a lid version with no bottom edge.
Added middle retaining clips to the base.
Updated V3 includes minor changes to the expansion card cutouts for a better fit and changes to the clips. Previous rear base clips interfered too much with the screen.