Shell Cover For Framework 13 laptop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hard shell protective cover for Framework 13 laptop
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 77
- Makes
- 2
- Views
- 750
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a protective cover for my Framework 13 Laptop similar to ones I have purchased for other models. no company makes one yet. This is a custom fit hardshell cover that still allows access to remove the modular ports. I recommend printing at 0.16 or 0.12 mm layer height. Some overhangs and very thin parts will benefit from extra layers.
ADDED: Split model for smaller printers. Due to the limited mating surface between the split parts. I have made flat joint pieces to help hold it together. It will require gluing. The largest piece is 233mm so it should print on 250mm print beds or larger. I haven't printed the split model yet so I appreciate feedback.
Updated V6 Fit refinement
Changes:
reduction in retaining clip size for less interference/better fit.
relocation of rear clips for less interference.
hole for audio jack.
side wall adjustments for a better fit.
Updated V5 Fit refinement
Changes:
Top and bottom reduced to 1.5mm (side walls still 2mm)
Reduced depth of the top lid for a tighter fit.
Over all tolerance improvements to improve fit.
Updated V4 Is thinner all over.
Changes:
Thinner, Original model was about 3.5mm thick. This one is 2mm thick.
Adjusted feet Hole location.
Corrected corner radius for a better fit.
Included a lid version with a thinner bottom edge.
Included a lid version with no bottom edge.
Added middle retaining clips to the base.
Updated V3 includes minor changes to the expansion card cutouts for a better fit and changes to the clips. Previous rear base clips interfered too much with the screen.