Split Keyboard Trackpad MagSafe Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model designed for my Chocofi keyboard to MagSafe onto my Logitech T650 trackpad at 45 degrees.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
While this is a specific use case, being modelled for a 13 year old trackpad, I did make the model parametric so you should have a starting point. Some feature break at high or low angles but you can take a look and make any of the changes you need in Fusion 360 to get it printable for you.
Once filled with concrete and adding rubber feet this isn't going anywhere!
AliExpress MagSafe Rings, you can use these or adjust the model for any others. You will also need thin metal rings for the keyboard case, I used these.