WAGO Label Flags (Print-in-Place, 221 Series, 3 Sizes, Rotatable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D-printable label flags for WAGO 221 connectors. Print-in-place hinge, rotatable up to 270°
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
These printable WAGO label flags are designed to make electrical work and cable organization easier and cleaner.
They are a simple, fully 3D-printable way to label your WAGO 221 connectors — ideal for workshops, makers, and electricians.
Features
- Print-in-place hinge (no assembly required)
- Rotatable from 0° to 270°
- Three flag sizes: short, medium, long
- Designed for WAGO 221-3 connectors, also fits 2- and 5-way versions
- Works with Brother label tape (6 mm) or hand-written text (Edding, marker, etc.)
Recommended Print Setup
- Material: PLA
- Layer height: 0.10 mm
- Infill: 100%
- Supports: None
- Print orientation: As provided (ready to print in correct position)
Tip: After printing, gently move the hinge back and forth to free it — it will rotate smoothly once released.
Use Cases
- Labeling and identifying electrical circuits
- Organizing connectors in control cabinets
- Cable management for makers and DIY enthusiasts
- Ideal for clean and modular wiring setups
Notes
These parts were printed and tested in PLA, but they can also be printed in PETG for extra durability.
No supports, no screws — just print, snap free, and use.