Kenmore Coldspot Refrigerator (1995) Drawer/Shelf Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawer track for a model 1069545721 Kenmore Coldspot refrigerator.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v3.0
This model requires a build volume of at least 220mm X 220mm X 220mm. The print orientation of the ShelfBracketV2_ReadyToPrint.stl file will provide an optimal print strength as the the bracket will be subject to stress, when installed in the refrigerator, in two axes. If printed in this orientation, add organic tree supports as shown in the example screenshots.
If you have a large print bed (e.g., 300mm X 300mm) the file ShelfBracketV2.stl, can be printed on it's back. Just be aware the print layers may be susceptible to stresses where backet attaches to the refrigerator wall. The “ReadyToPrint” file is less susceptible to these stresses.
Print settings:
0.2 mm layer height
5 wall perimeters
Enable organic supports
25% infill density