Spool Spacer 64mm+ for AD5x
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric spool spacer based on Andry Maltsev's design for spools with an inner diameter of >64mm.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I remade the model by Andry Maltsev to be parameteric for spools with a larger ID than the original. Use the .f3d file in fusion to make different sizes or leave a comment and I can do it for you. Modifying the parameters won't work for anything less than 64mm ID x 50mm height, however.
I printed with .6 nozzle, 2 walls, 15% infill. PETG recommended as it flexes better in my experience, but PLA/PLA+ should work alright, just increase the wall thiccness.
Pictures of different spools:
73mm ID x 58mm height, pictured: https://www.onlyspoolz.com/portfolio/spool-anycubic-petg-2024/
75mm ID x 60mm height, untested: https://www.onlyspoolz.com/portfolio/stronghero_3d_pla_1_75mm_1kg/
75mm ID x 85mm height, untested : https://www.onlyspoolz.com/portfolio/spool-kingroon-pla/
The inner diameter of the adapter is 55mm, so it may work for other systems, but I have only tested it on the AD5X.