Spool Spacer 64mm+ for AD5x
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric spool spacer based on Andry Maltsev's design for spools with an inner diameter of >64mm.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 129
- Makes
- 1
- Views
- 400
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I remade the model by Andry Maltsev to be parameteric for spools with a larger ID than the original. Use the .f3d file in fusion to make different sizes or leave a comment and I can do it for you. Modifying the parameters won't work for anything less than 64mm ID x 50mm height, however.
I printed with .6 nozzle, 2 walls, 15% infill. PETG recommended as it flexes better in my experience, but PLA/PLA+ should work alright, just increase the wall thiccness.
Pictures of different spools:
73mm ID x 58mm height, pictured: https://www.onlyspoolz.com/portfolio/spool-anycubic-petg-2024/
75mm ID x 60mm height, untested: https://www.onlyspoolz.com/portfolio/stronghero_3d_pla_1_75mm_1kg/
75mm ID x 85mm height, untested : https://www.onlyspoolz.com/portfolio/spool-kingroon-pla/
The inner diameter of the adapter is 55mm, so it may work for other systems, but I have only tested it on the AD5X.