K1 SE Rear Fan Exhaust Port Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the unused rear exhaust port on a K1 SE.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 312
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Got tired of looking at the empty hole where an exhaust fan would go on my K1SE so I made something that looked a little more like a part of the machine if Creality chose to include one. Designed to fit exactly over the current port and be fastened into the existing holes in the back for a fan.
The version I installed has the Creality Logo embossed because I think it looks more factory that way but I've also included the same model without any markings if you'd rather it blend into the background.
Designed in Fusion 360, printed on my K1SE face down using a B Plate for texture with Normal Supports for better quality of the logo and bolt recesses. Standard print settings otherwise.
Note that both designs have internal posts to prevent you from overtightening the cover when installed. These posts are a few mm deeper (or taller if you will) than the cover so they touch the back of the unit when installed. Look at the model in 3D and you'll see what I mean.
If you use it please upload a photo and let me see it!! Either way appreciate the read. Happy Printing!